Basic cleaning of stone or tile floors
Prepare a solution using Kiilto Pro Sartek 2 cleaning agent, diluted at a rate of 50 ml per litre of hot water. Apply the solution to the surface to be cleaned with a scrubbing mop and let it sit for 5–10 minutes. Clean the floor thoroughly using a single disc maintenance machine with a red pad. Vacuum up the solution with a wet vacuum and rinse the surface thoroughly. Allow approximately one hour for drying.
Protection of stone or tile floors
Pour a small amount of Kiilto Pro Kisu stone protector onto the surface. Spread it carefully in a thin layer over each area, paying particular attention to grout lines. If the floor remains porous after application, apply a second coat once the first coat has dried. Typically, one application is sufficient for ceramic tiles.