Kiilto Pro Kisu
Stone protection for ceramic tiles
Impregnating agent for the protection of stone and tile floors and their joints. Absorbs into surface pores and leaves no visible film.
- Easy to apply
- Forms an invisible and effective protective layer
- Does not leave a film
- Does not make the surface slippery
- Dries quickly
Impregnating agent that is easy to apply, forms an invisible and effective protective layer on stone floors. Does not leave a film, does not make the surface slippery. Dries quickly.
Impregnating agent for protecting stone and tile floors and their joints.
Product pH: 5
|Package Size||Product Code||GTIN|
|3 x 5 l||T7423.005||6411517423055|
|6 x 1 l||T7423.001||6417964742312|
Apply Kiilto Kisu as a thin even layer on dry and clean floor. Apply with a clean mop or polish applicator. Usually, apply one layer of Kiilto Kisu, on porous surfaces 2–3 layers. Let it dry for a minimum of 30 minutes between applications. The colour of the surfaces may deepen in connection with the treatment. A surface treated with Kiilto Kisu cannot be painted, lacquered or waxed.
Drying time approx. 60 minutes under normal conditions. Minimum working temperature +15°C. Covers 30–70 m²/l, depending on the porosity of the surface.
Surface patch-up: clean the floor with Kiilto Teho A 100 and apply one layer of Kiilto Kisu on fully dried surface where worn.
Maintenance cleaning: normal manual or mechanical methods using e.g. Kiilto 10 Universum or Kiilto Teho A 100 as the cleaner.
Avoid unnecessary skin contact. Safety gloves are recommended in continuous use. In case of eye contact, rinse with copious water and then contact a doctor, if necessary. Material safety data sheet and instructions for the disposal of empty product package: www.kiiltoclean.fi.