Using the correct amount of detergent is essential for ensuring optimal cleaning results. In addition to improving results, accurate dosing offers several other benefits. We recommend always using the precise amount required – it saves time and costs, reduces environmental impact, and improves work safety.
Always follow the dosing instructions
Using the correct amount of cleaning agent plays a key role in managing the consumption of chemicals. A common misconception is that exceeding the recommended dosage will deliver faster or better results. In practice, this is rarely the case.
The correct dosage depends on the level of soil on surfaces and the cleaning method used. With a damp method, the role of the cleaning agent is less significant, and the dosage can be 1–3 ml of detergent per 1 litre.
If there is more soil on the surfaces, a moist cleaning method is required. In this case, the role of the cleaning agent becomes more important, and the dosage should be 3–5 ml per 1 litre.
Cleaning frequency also affects the choice of method. For areas cleaned daily, the damp method is often sufficient, whereas areas cleaned less frequently (e.g. once a week) typically require a moist method. For all-purpose cleaners, the recommended dosage should not be exceeded. If the maximum dosage is insufficient, reassess product suitability rather than increasing concentration.
Overdosing can reduce performance
Incorrect dosing often leads to poorer results. Too little product results in insufficient cleaning, while too much can cause other issues.
Under-concentrated solutions may:
- Leave surfaces insufficiently cleaned.
- Increase the need for mechanical action.
- Increase worker strain.
- Allow dirt to build up on surfaces.
- Increase the need for basic cleaning.
The disadvantages of using too much detergent are not limited to poor results. Overuse of cleaning agents can also:
- Damage surfaces and materials.
- Cause skin irritation.
- Increase the chemical load on the environment.
- Surfaces may become sticky and attract dirt more quickly.
Use dosing equipment
Dosing equipment ensures accurate and consistent results. Automatic systems are ideal for easiness and user safety. Manual solutions, such as dosing pumps, can also be effective when automatic systems are not available.
Dosing bottles help prepare the required amount of cleaning solution for daily cleaning. When using pre-diluted solutions, consider the following:
- Take care of good hand hygiene.
- Use only intact and correctly labelled solution bottles.
- Prepare the ready-to-use solution in a clean, dry bottle.
- Add water first, then the cleaning agent.
- Prepare only enough solution for one working day at a time.
- Clean the bottles at the end of the shift.
- Replace worn or damaged bottles, caps, and labels.
- Make use of solution labels.
Safe handling practices
Never mix different cleaning products, change labels, or transfer products into unlabelled containers. For example, combining acidic and chlorine-based products can cause hazardous reactions.
Store and transport cleaning products in tightly closed, clearly labelled containers. Clean any spills immediately to prevent safety risks such as slips or accidental exposure. Spills can also discolour or damage surfaces over time.
Summary
Accurate dosing supports both good end results and efficiency of cleaning. Key benefits include:
- Improved cleaning performance.
- Reduced working time.
- Enhanced workplace safety.
- Lower costs.
- Reduced environmental load.
Using the correct amount of cleaning agent is essential for consistent, reliable results. Kiilto offers several dosing solutions that make your work easier. Contact your nearest expert to find out more!