Kiiltomelt S 185

Kiiltomelt S 185 is a filled, EVAC-based hot melt adhesive for edge banding.

Special features

  • M1 classification
  • Suitable also for slow feed machines

Materials

Product Information
Application

Kiiltomelt S 185 is an edge banding hot melt adhesive, which is suitable also for slow feed automatic edge gluing machines. The adhesive is suitable for melamine edge bands, PVC-edge bands , ABS-edge bands, PVC/ABS laths (primered), veneer bands, laminate and solid wood laths. Complies with M1-emission classification for building materials.

Package Size Product Code
Kiiltomelt S 185 beige 10 kg T7308.010
Kiiltomelt S 185 valkoinen 10 kg T7309.010
Technical Information
Colors

Beige, white

Softening point

100 °C (DIN 52011)

Viscosity

40,000 mPas, 200 °C, 3 s¯¹

Working conditions

+18–22 °C

Application temperature

165 - 180 °C (application roller)

Package sizes

10 kg

Air humidity

60 - 70 %

Wood moisture content

7 - 10 %

Storage

In unopened containers, at max. +40 °C, for 36 months.

Instructions and Safety
Instructions for use

The adhesive is melted in the adhesive tank. The minimum feed speed of the machine is 10 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to avoid the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, because otherwise the adhesion and flowing properties of the adhesive may weaken.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
Key Flag