Kiilto Pro PUR TB 30
two component polyurethane adhesive for truck body manufacturing
Kiilto Pro PUR TB is a two-component, solvent-free polyurethane adhesive series designed for sandwich panel manufacturing in truck body applications. The series includes adhesives with different open times, enabling easy selection for various assembly stages and production line requirements.
Special features
- Reliable adhesion for sandwich structures
- Smooth pumpability in automated systems
- Optimised open and pressing time for efficient production
- Balanced strength and elasticity
- Bonds metal, insulation materials and composites
Links
Materials
Kiilto Pro PUR TB 30 gives a strong, yet an elastic bond. Suitable for automatic application. Suitable for e.g. gluing of metals, wood, insulation materials and fiber composite. Special characteristics of the adhesive is its tough grip on metal surfaces and low viscosity. Used in conjunction with Kestopur 200/S -hardener.
30%
Polyurethane
Resin: 1.6 g/cm³, hardener: 1.2 g/cm³
SS 10 N/mm², Aluminium ≥ 5 N/mm² (28 d 23 °C, 50 % RH)
10 N/mm² (DIN 53504)
25% (DIN 53504)
Shore D 55
5 weight parts resin + 1 weight part hardener
Resin approx. 13 000 mPas, Hardener: Approx. 200 mPas (Brookfield, RVT 20 °C)
approx. 5000 mPas (Brookfield RVT 20 °C)
Beige
30 min (120 g, 20°C, 50 % RH)
60 min (23 °C, RH 50%)
150–500 g/m² depending on materials
140 min (23 °C, RH 50%)
Unopened at +10–25 °C in a container (1000 l) for 6 months, in smaller containers 12 months. After long storing, stir before use.
The surfaces to be bonded must be clean and dry. Remove oxides by sanding, and grease etc. dirt with Kiilto Cleaner 303. The properly cleaned surface can be sanded and then primed to improve adhesion. Remove the sanding dust carefully prior to adhesive application. Stir the resin before use. Add Kestopur 200/S hardener to resin, and mix until a uniform colour is achieved. Apply the adhesive on one or both sides of the materials to be bonded. Fresh adhesive stains are removed with a dry cloth and then surfaces are cleaned with Kiilto Cleaner 303 or Kiilto Cleaner 302. Cured adhesive can only be removed by mechanical means. We recommend gluing at room temperature. The open time of the adhesive depends on temperature and air humidity. However, the gluing can be carried out at lower temperatures (even at +10 °C), but then the pressing time will be significantly longer and spreading properties will suffer. Higher pressing temperature will shorten the pressing time.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact with and exposure to the uncured product: use safety gloves. Refer to the specific material safety data sheet. Go to www.kiilto.com/recycling for more information on product and package disposal.