Kovete M

Hardener M is a solvent-free isocyanate hardener for 2-component Kestokol EPI-adhesives.

Special features

  • Check the correct hardener in the TDS of the adhesive




Hardener M is used as the hardener component for 2-component Kestokol EPI-adhesives. Check the correct hardener in the TDS.

Package Size Product Code
Kovete M 1,2 kg/ 1 l T2400.001
Kovete M 250 kg/200 l T2400.200
Kovete M IBC cont T2400.994
Kovete M kontti T2400.992


Density/specific weight

approx. 1.20 kg/dm³



Mixing ratio

See technical data sheet of the adhesive.


210 mPas (Brookfield, RVT 25°C)


In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Instructions for use

The instructions for use of Hardener M can be found in the TDS of Kestokol EPI adhesive.

When handling Hardener M, use protective clothing, safety gloves and goggles. Small quantities of hardener and resin can be mixed together and taken to landfill when cured. Larger amounts are to be delivered to an appropriate hazardous waste treatment plant.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Key Flag