Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto PL 250 Laattaliima + hardener

Light-coloured, solvent-free, two-component polyurethane adhesive for the gluing of ceramic floor and wall tiles. Suitable also for the gluing of glass mosaic. Also, for exterior applications. Fire classification according to FTPC, MED certificate (Wheelmark).

Special features

  • two-component polyurethane tiling adhesive
  • for interior and exterior applications
  • for gluing of ceramic tiles, glass mosaic, marble and stone
  • fire classification according to FTCP
  • MED certificate, so-called Wheelmark

Application

Kiilto PL 250 Laattaliima is a two-component, solvent-free, M1-labelled and fire-classified polyurethane adhesive, which gives a strong, yet elastic bond. Due to its paste formula, it is ideal for trowel application for walls and ceilings. Used in conjunction with Kiilto PL 250 Laattaliimakovete hardener. Kiilto PL 250 Laattaliima is used for the gluing of, e.g., metals, PVC and concrete as well as the gluing of ceramic and glass mosaic tiles on Kiilto waterproofing membranes. Adhesion strength complies with EN 12003 and EN 1348 standards after water-stress tests. The adhesive is fire classified according to IMO FTPC Resolution MSC.61 (67) Part 2 and Part 5 and has an MED certificate (Wheelmark).

Coverage

600–1 500 g/m² depending on the material and the substrate

Package Size

EAN Code

4,2 kg/5 l + 0,7 kg 6411511660050
Package Size 4,2 kg/5 l + 0,7 kg
EAN Code 6411511660050
 

Consistency

non-sagging paste

Density/specific weight

approx. 1.5 kg/dm³ (resin 1.6 kg/dm³ and hardener 1.2 kg/dm³)

Tensile strength

5 N/mm²

Elongation at break

30 %

Mixing ratio

6 weight parts Kiilto PL 250 Laattaliima + 1 weight part Kiilto PL 250 Laattaliimakovete hardener

Mixture colour

broken white

Pot life

approx. 60 min (20 °C, 50 % RH)

Curing rate

Tiles can be grouted after 8–9 h (20 °C). The final strength will build within a week.

Working time

Approx. 90 min. after mixing (spread on the substrate).

Consumption

600–1 500 g/m² depending on the material and the substrate

Package sizes

5 l/4.2 kg + 0.75 l/0.7 kg

Frost resistance

Product components must be protected from freezing. Cured product is frost-proof.

Coverage

600–1 500 g/m² depending on the material and the substrate

Storage

In unopened containers at +20 °C for 12 months.

Instructions for use

The surfaces to be bonded must be clean and dry. Remove oxidations, grease and other impurities using Kiilto Maalarinpesu, solvent or by sanding. When applying Kiilto PL 250 tile adhesive on concrete, relative humidity of the surface can be max. 90%. Stir Kiilto PL 250 Laattaliima adhesive and carefully add the hardener. Then mix thoroughly. Apply the mixture with a trowel or other application tool on one or both surfaces to be bonded. Remove fresh adhesive stains with a dry cloth and clean the surfaces with acetone or xylene. Hardened adhesive can only be removed by mechanical means. We recommend using adhesive at room temperature. However, the gluing can be carried out at lower temperatures (even at +5–10 °C), but then the curing time will be much longer and spreading properties will suffer.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.