Kiiltomelt W 401 white
Kiiltomelt W 401 is a filled, EVA‑based hot melt adhesive for edge banding
Links
Materials
Kiiltomelt W 401 is a hot melt adhesive for automatic edgebanding machines. It can be used also as precoating hot melt.
Kiiltomelt W 401 is suitable for bonding veneer, melamine, polyester, ABS, and PVC edge banding.
| Package Size | Product Code |
|---|---|
| Kiiltomelt W 401 white 25 kg | T7501.025 |
5%
White, beige
110 °C (DIN 52011)
120 000 mPas, 200 °C, 5 s¯¹
180 - 250 g/m²
18 - 25°C
200 - 210°C
50 - 60%
8 - 10%
In unopened containers, at max. +25 °C, for 36 months
The adhesive is melted in the melting tank.
The machine feed speed should be adjusted to a minimum of 12 m/min. If the feed speed is lower than recommended, the adhesive temperature at the application roller should be increased to prevent the adhesive from cooling too much before the pressing stage.
For longer production breaks, the adhesive temperature must be lowered, as otherwise the bonding properties and flow characteristics may deteriorate.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.