Kiiltomelt W 400 beige
Kiiltomelt W 400 is a filled, EVA-based hot-melt adhesive for edge banding.
Links
Materials
Kiiltomelt W 400 is a hot melt adhesive for automatic edge‑banding machines. It can be used also as precoating hot melt.
Kiiltomelt W 400 is suitable for bonding veneer, melamine, polyester, ABS and PVC edge bands
| Package Size | Product Code |
|---|---|
| Kiiltomelt W 400 beige 25 kg | T7500.025 |
5%
Beige
100 °C (DIN 52011)
75 000 mPas, 200 °C, 5 s¯¹
18 - 25°C
170 - 200°C
50 - 60 %
8 - 10 %
In unopened containers, at max. +25 °C, for 36 months
The adhesive is melted in the melting tank. The minimum feed speed of the machine is 15 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to avoid the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, because otherwise the adhesion and flowing properties of the adhesive may weaken.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.