Kiiltomelt S 208
Hot melt adhesive

Kiiltomelt S 208 is a filled, EVAC-based hot melt adhesive for edge banding.

Special features

  • M1 classification 




Kiiltomelt S 208 is a multi-purpose hot melt adhesive for bonding edge bands. The adhesive has a good adhesion to various edging materials. The adhesive melts easily, is easy to apply and does not web. Suitable for melamine impregnated paper edge strips, PVC-edge strips/laths, ABS-edge strips/laths, veneer strips, laminate and solid wood laths gluing. Adhesive is compliant with Finnish Emission Classification of Building Materials (M1).

Package Size Product Code
Kiiltomelt S 208 beige 15 kg T7322.015
Kiiltomelt S 208 valkoinen 15 kg T7321.015

beige and white

Softening point

103 °C (DIN 52011)


45 000 mPas, 200 °C, 3 s¯¹

Working conditions

+18–22 °C

Application temperature

190 - 210 °C (application roller)

Package sizes

15 kg

Air humidity

60 - 70 %

Wood moisture content

7 - 10 %


In unopened containers, at max. +40 °C, for 36 months.

Instructions for use

The adhesive is melted in the adhesive tank. The minimum feed speed of the machine is 15 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to avoid the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, because otherwise the adhesion and flowing properties of the adhesive may weaken.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Key Flag