Kiiltomelt PS 130 beige
Hot melt adhesive

Kiiltomelt PS 130 is an EVAC-based hot-melt adhesive for profile coating.

Special features

  • M1 classification
  • Suitable for melamine paper foils




Kiiltomelt PS 130 is a profile coating hot-melt adhesive used especially for profile coating with melamine paper foils. Complies with M1 Emission Classification of Building Materials.

Package Size Product Code
Kiiltomelt PS 130 beige 15 kg T7318.015
GREEN CONTENT, renewable and recycled material content




Softening point

85 °C (DIN 52011)


10 000 mPas, 180 °C, 5 s¯¹

Working conditions

+18 - 22 °C

Application temperature

180 - 210 °C (on the applicator roll)

Package sizes

15 kg

Air humidity

60 – 70 % RH

Wood moisture content

7 - 10 %


In unopened containers, at max. +40 °C, for 36 months.

Instructions for use

The adhesive is melted in the adhesive tank. The recommended feed speed is 20–70 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to prevent the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, otherwise the adhesion and flowing properties of the adhesive may weaken.

Environment and safety

Avoid unnecessary skin contact with and exposure to the uncured adhesive: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Key Flag