Kiiltomelt 1225
Hot melt adhesive

Kiiltomelt 1225 is an EVAC-based hot melt adhesive for pleating of air filters.

Special features

  • Light coloured
  • Ourdorless
  • Good hot tack




Kiiltomelt 1225 hot melt adhesive is used for pleating of airfilters. The adhesive has high melt viscosity and good hot tack.

Package Size Product Code
Kiiltomelt 1225 10 kg T7244.010


Softening point

112 °C (DIN 52011)


10,000 mPas, 160 °C, 100 s¯¹

Open time


Application temperature

150–180 °C

Package sizes

10 kg


In unopened containers, at max. +40 °C, for 36 months.

Instructions for use

Suitable application methods are nozzle and roller.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to the product specific MSDS. Go to for information on product and package disposal.

Key Flag