Kiiltomelt 1201
Hot melt adhesive

Kiiltomelt 1201 is an EVAC-based hot-melt adhesive for the pleating of air filters.

Special features

  • Elastic
  • Can be foamed




Kiiltomelt 1201 hot-melt adhesive is used for the pleating of cone-shaped air filters. The adhesive has a high melt viscosity and gives a very elastic bond.

Package Size Product Code
Kiiltomelt 1201 500 kg Bigbag T7242.500
GREEN CONTENT, renewable and recycled material content




Softening point

77 °C (DIN 52011)


11 000 mPas, 160 °C, 100 s¯¹

Open time

medium long

Application temperature

150 - 180 °C

Package sizes

10 kg, 500 kg


In unopened containers, at max. +40 °C, for 36 months

Instructions for use

Suitable application methods are by nozzle, disc and transfer arm. Adhesive can be foamed.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Key Flag