Kiilto Vahvikekangas

Reinforcement fabric to be used with Kiilto one-component waterproofing membranes.

Materials

Product Information
Application

Kiilto Vahvikekangas reinforcement fabric can be used for the entire waterproofed area between Kiilto one-component waterproofing membrane layers. Reinforcement fabric is suitable also for sealing corners, joints, angles and material junctions. Used with Kiilto one-component waterproofing membranes from the Kiilto waterproofing systems.

Package Size EAN Code
10 m x 1 m 6411513592106
Technical Information
Application temperature

+15–25 °C

Layer thickness

Approx. 0.3 mm

Storage

In a cool place, not below +1°C, protected from light.

Substrate humidity

< 90 % RH

Type/binder

Polypropylene

Instructions and Safety
Instructions for use

Walls:
If needed, sand and/or smooth uneven substrates with Kiilto cementitious wall plasters. Prime dry wall surface prior to waterproofing with compatible primer as per instructions. Apply Kiilto one-component waterproofing membrane on the wall area where reinforcement fabric will be placed. Press reinforcement fabric to fresh waterproofing membrane. Apply another coat of waterproofing membrane so that the fabric is wetted through and covered. Let the waterproofing membrane dry for at least 6 hours.

Floors:
If needed, sand and/or smooth uneven substrates with Kiilto levelling compound. Prime dry floor prior to waterproofing with a compatible primer as per instructions. Apply Kiilto one-component waterproofing membrane on the wall area where reinforcement fabric will be placed. Press reinforcement fabric to fresh waterproofing membrane. Apply another coat of waterproofing membrane so that the fabric is wetted through and covered. Let the waterproofing membrane dry for at least 6 hours.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, go to www.kiilto.com.

Certificates
M1 emission classification for building material
LEED