Kiilto Easy Remover
Ready-mixed wallpaper stripper

A ready-to-use, non-drip and odourless wallpaper stripper for removing paper and non-woven backed wallpaper when cellulose-, starch-based wallpaper paste or eg. Kiilto NoWo or Kiilto Combi wallpapering adhesive has been used.

Special features

  • ready to use, non-drip, prolonged effect
  • for removing paper, paper backed vinyl and non-woven wallpapers
  • 4-5 m²/l




Kiilto Easy Remover is a ready-mixed wallpaper stripper and is used to remove paper or non-woven wallpapers when cellulose- or starch-based wallpaper paste has been used. - complies with M1-emission classification - ready-mixed, no waiting - good application properties - good wetting - prolonged effect

Package Size EAN Code
5 l 6411513197059
10 l 6411513197103
15 l 6411513197158
Application temperature

+18...20 °C


4–5 m²/l

Density/specific weight

approx. 1.03

Frost resistance


Package sizes

5 l, 10 l, 15 l


In unopened containers, above +1°C, for 18 months. After long storing, stir before use. An opened container must be used within a month.

Instructions for use

Wallpaper stripper is applied generously to the surface 1 L/4–5 m² and left to soak for 15–60 minutes depending on the wallpaper's absorbency. After the wallpaper has saturated, it starts to peel off and you can start to peel it off. If there are several wallpaper layers, repeat the treatment or place a plastic film on fresh wallpaper stripper to ensure proper wetting. The surface of washable wallpapers is roughened before applying Kiilto Easy Remover. The plastic layer of vinyl wallpapers and the top layer of delaminated wallpapers are removed to ensure proper wetting. Moisture-sensitive flooring materials should be protected during the treatment. Room and surface temperature +18–20 °C. Carry out the job at room temperature. Let Kiilto Easy Remover acclimatise to room temperature. The prevailing conditions, such as room and wallpaper temperature, substrate quality and humidity, as well as the amount of Kiilto Easy Remover applied, will significantly affect the end result. Therefore, our recommendations should only be used as a guide.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Key Flag