Kiilto Silk Semi
- Easy to spread
- Does not make the floor slippery
- An excellent durability
- Easy to maintain
- A high chemical and hand sanitizer resistance
Floor polish for polishing and re-coating all floor surfaces that can be polished. Can also be used as a so-called primer floor polish.
Product pH: 8.5
White, unscented liquid.
|Package Size||Product Code||GTIN|
|3 x 5 l||41045||6417964410457|
Store in warm place.
Apply polish on clean and dry floor. Dose directly on the floor or to the equipment used in the application and spread evenly. Apply 1–2 coats depending on how worn out the floor is and the level of future use. Let dry at least 30 minutes between each coating.
Re-coating is done on Kiilto Silk polish. Clean the floor surface with Kiilto Pinta or Kiilto 10 Universum and apply a single coat on dry surface.
In maintenance cleaning, clean manually or mechanically with Kiilto Vieno or Kiilto 10 Universum. In addition to all-purpose cleaners, it is recommended to use maintenance cleaners, such as Kiilto Illusia 10 or Kiilto Pollycare.
Consumption 80–120 m² / l, depending on how worn out the floor is and how the product is spread. The polish usually dries approx. in 30 minutes. Recommended working conditions: temperature 18–24 °C, relative humidity 40–70 %.
Avoid unnecessary contact with skin. In continuous use, protective gloves are recommended. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if needed. For safety data sheet please see www.kiiltoclean.com or www.kiiltoclean.fi.
Mix the product carefully before use. The product freezes.