Kiilto Pro WRX 3072
EN 204/D3 adhesive
Kiilto Pro WRX 3072 is an EN 204 D3 classified PVAC- adhesive for wood.
Special features
- 1-component
- General use D3 class adhesive
- pH neutral, non-discoloring
- Suitable for both cold and hot pressing
- Includes renewable raw materials
Links
Materials
Kiilto Pro WRX 3072 (T2605) is a reactive PVAc-dispersion adhesive, which is well suited for the gluing of massive wood and hardwoods. Due to its D3 durability class, Kiilto Pro WRX 3072 (T2605) adhesive can be used for interior applications that have frequent exposure to high humidity, or running or condensation water, or for exterior applications which are not exposed to weather.
| Package Size | Product Code |
|---|---|
| Kiilto Pro WRX 3072 100 kg | T2605.100 |
| Kiilto Pro WRX 3072 15 kg | T2605.015 |
| Kiilto Pro WRX 3072 IBC cont | T2605.994 |
8%
PVAc
7
White, transparent after drying
7000 mPas (Brookfield, RVT +20 °C)
See instructions for use.
120 - 150 g/m²
15 min. (Pine, 12 % wood moisture, temperature 20 °C, 50 % RH)
0,5 N/mm²
+6 °C
6 - 15 %
In unopened containers, above +1 °C, for 6 months. After long storing, stir before use.
Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold, hot or high frequency press. The final strength and water resistance of the bond is reached within 7 days.
The consumption affects the open time of the adhesive as follows (pine 12 % wood moisture, 23 °C, 50 % RH):
| Consumption (g/m²) | Open time (minutes) |
| 120 | 5 |
| 150 | 10 |
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.