Kiilto LF Lightweight finishing plaster

An extra fine ready-mixed plaster for finishing walls and ceilings in dry interior areas prior to painting and wallpapering. Easy to apply and sand, also for painted surfaces.

Special features

  • Provides a very smooth surface
  • Light grey
  • Ideal for final corrections on primer paint
  • Filling capacity max. 3 mm
  • Coverage 1 l/m²/mm
  • Drying time approx. 1-2 h/mm

Links

Materials

Application

Kiilto LF is a fine, waterbased ready-mixed plaster. Colour light grey. We recommend painting the surface before wallpapering to aid future removal. Complies with the requirements of EN 15824:2009 standard.

Package Size EAN Code
3 l 6411513708033
10 l 6411513708101
Bond strength

> 0.3 MPa (EN 15824)

Classifications and certificates

stress grading RL01...RL04 of paintable surfaces (The RYL Code of building practice 2012)

Colors

Light grey

Curing rate

approx. 1-2 h/mm (+18 °C) (depending on layer thickness and prevailing conditions)

Density/specific weight

approx. 1.2 kg/l

Layer thickness

max. 3 mm

Max. grain size

0.15 mm

Package sizes

3 l, 10 l plastic containers

Storage

In unopened containers, above +1 °C, for 1 year.

Type/binder

Polymer-limestone -based plaster

Working conditions

normal room conditions, lowest operating temperature +10 °C

Instructions for use

The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat. Kiilto LF is a ready-mixed plaster. After long storing, stir before use. The product can be diluted with water, if needed. Apply with a steel trowel. The plaster can also be applied with a long haired roller, and then the surface is smoothed with a steel trowel. After drying the surface can be easily sanded.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. To use the product properly, please read the product brochure, work instructions and the safety data sheet available at www.kiilto.com.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Please refer to the material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
CE marking
LEED
The Nordic Swan Ecolabel