Kiilto Block Hardener
A solvent-free isocyanate hardener for 2-component Kiilto Block Barrier.
- To be used in combination with Kiilto Block Barrier
Kiilto Block Hardener is used as a hardener for two-component Kiilto Block Barrier.
|Package Size||EAN Code|
|3 l/3 kg||6411513449035|
approx. 1.20 kg/l
Kiilto Block 100 weight parts
Kiilto Block hardener 30 weight parts
Kiilto Block 10 kg
Kiilto Block hardener 3 kg
Unopened at (+10 - +25 )°C for 12 months.
approx. 200 mPas
Please refer to the instructions for use in the Kiilto Block Barrier product brochure.
Mix the Kiilto Block Hardener thoroughly with the Kiilto Block Sealant. Follow the recommended mixing ratio exactly. Too small or too big an amount of hardener will result in incomplete hardening and in most cases too soft a result. Avoid contact with moisture. This might cause gas formation and viscosity to increase. Ensure good ventilation and wear suitable protective clothing.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Therefore, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to the material safety data sheet. For more information about the product and package disposal, visit www.kiilto.com.