Kestopur PL 5-10 is a two-component polyurethane adhesive for the gluing of metal, wood and insulation materials as well as fibre composite in sandwich panel constructions for the marine industry.

Special features

  • Solvent-free
  • Strong, durable
  • Suitable for automatic application

Links

Materials

Application

Kestopur PL 5–10 gives a strong, yet elastic bond. Kestopur PL 5–10 is suitable for automatic application. Used in conjunction with Kestopur 200/S hardener. Kestopur PL adhesives are fire classified according to IMO FTPC, Part 5 and have an MED certificate (Wheel-mark). Adhesive is compliant with Finnish Emission Classification of Building Materials (M1). Kestopur PL 5-10 adhesive is used for the gluing of e.g. wood, metals, insulation materials, PVC, concrete, glass and glass fibre.

Package Size Product Code
Kestopur PL 5-10 24kg/20 l T1409.020
Kestopur PL 5-10 300 kg avok. T1409.300
Kestopur PL 5-10 kontti T1409.992
Type/binder

Polyurethane

Density/specific weight

Resin approx. 1.60 kg/dm³, Hardener approx. 1.20 kg/dm³

Lap shear strength

SS 7 N/mm 2 , common beech 15 N/mm 2 , untreated aluminium 7 N/mm 2 (28 d 23 °C, 50 % RH)

Tensile strength

7 N/mm² (DIN 53504)

Elongation at break

15 % (DIN 53504)

Hardness

Shore D 65

Mixing ratio

4.5 weight parts Kestopur PL 5–10 resin + 1 weight part Kestopur 200/S hardener

Viscosity

Resin approx. 17 000 mPas, Hardener: 200 mPas (Brookfield, RVT 20°C)

Mixture viscosity

approx. 6,500 mPas (BrookField RVT 20 °C)

Mixture colour

Beige

Pot life

approx. 4.5 min (120 g, 20 °C, 50 % RH)

Open time

max. 7.5–12 min/20 °C

Consumption

200-600 g/m² depending on materials

Pressing time

min. 25 min / 20 °C

Storage

Unopened at +10–25 °C in a container (1000 l) for 6 months, in smaller containers 12 months. After long storing, stir before use.

Instructions for use

The surfaces to be bonded must be clean and dry. Remove oxides by sanding, and grease and other dirt with Kiilto Cleaner 303. Stir Kestopur PL 5-10 resin first and then add the hardener and stir until the mixture is evenly coloured. Apply the adhesive on one or both sides of the materials to be bonded. Remove fresh adhesive stains with a dry cloth and clean the surfaces with Kestopur 2K-Cleaner, acetone or xylene. Hardened adhesive can only be removed by mechanical means. We recommend gluing at room temperature. Gluing can be carried out at below room temperature (+5–10 °C), but the hardening process will be slower and application may be affected.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

M1 emission classification for building material
IMO wheelmark
Key Flag