Kestopur PL 250/60 is a 2-component polyurethane adhesive for the gluing of metal, wood and insulation materials as well as fiber composite in sandwich panel constructions for the marine industry.

Special features

  • Solvent-free
  • Strong, durable
  • Paste consistency

Links

Materials

Product Information
Application

Kestopur PL 250/60 gives a strong, yet an elastic bond. Due to its paste formula, it is ideal for trowel application for walls and ceilings. Used in conjunction with Kestopur 200/S hardener. Kestopur PL adhesives are fire classified according to IMO FTPC, Part 5 and have a MED certificate (Wheel-mark). Adhesive is compliant with Finnish Emission Classification of Building Materials (M1). Suitable for gluing of e.g. wood, plywood, metal, PVC, EPS (Styrox®), different types of insulation materials and concrete.

Package Size Product Code
Kestopur PL 250/60 24 kg/20 l T2309.020
Technical Information
Type/binder

Polyurethane

Density/specific weight

Resin approx. 1.60 kg/dm³, Hardener approx. 1.20 kg/dm³

Lap shear strength

SS 7 N/mm² (28 d 23 °C, 50 % RH)

Tensile strength

7 N/mm² (DIN 53504)

Elongation at break

20 % (DIN 53504)

Hardness

Shore D 55

Mixing ratio

6 weight part Kestopur PL 250/60 resin + 1 weight part Kestopur 200/S hardener

Viscosity

Resin approx. 5 million mPas, Hardener: approx. 200 mPas (Brookfield RVT 20°C)

Mixture viscosity

approx. 3 million mPas (BrookField RVT 20°C)

Pot life

approx. 60 min. (120 g, 20°C, 50 % RH)

Open time

max. 90 min / 20 °C

Consumption

200–800 g/m² depending on materials

Pressing time

min. 6 h / 20 °C

Storage

Unopened at +10–25 °C in a container (1000 l) for 6 months, in smaller containers 12 months. After long storing, stir before use.

Instructions and Safety
Instructions for use

The surfaces to be bonded must be clean and dry. Remove oxides by sanding, grease etc. dirt with a cleaner. First stir Kestopur PL 250/60 resin. Then add the hardener carefully stirring. Apply the adhesive using a roller, spatula or other application tool on one or both sides of the materials to be bonded. Remove fresh adhesive stains using a dry cloth and clean the surfaces with Kestopur Cleaner 300, 302 or acetone. Cured adhesive can only be removed by mechanical means. We recommend gluing at room temperature. Gluing at a lower temperature is possible ( even +5–10 °C), but will lead to weaker spreading properties and to significantly slower curing process.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. Lopputulokseen vaikuttaa merkittävästi myös työn suoritustapa. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, go to www.kiilto.com.

Certificates
M1 emission classification for building material
IMO wheelmark
Key Flag