Kestopur PL 240/40
2-component solvent-free pu-adhesive

Kestopur PL 240/40 is a 2-component polyurethane adhesive for the gluing of metal, wood and insulation materials as well as fiber composite in sandwich panel constructions in transport- and marine industry.

Special features

Advantages and properties

  • Reaches soon final strength
  • Extremely strong
  • Excellent adhesion to several materials
  • Paste consistency

Links

Materials

Application

Kestopur PL 240/40 gives a very strong bond. The adhesive is ideal for trowel application. Used in conjunction with Kestopur 200/S hardener. Kestopur PL adhesives are fire classified according to IMO FTPC, Part 5 and have a MED certificate (Wheel-mark). Kestopur PL 240/40 is used for gluing of e.g. metal, glass fibre laminate, insulation wools and foams, ceramic tiles and sandwich panel manufacture. When gluing plastic e.g. PES, PC, PVC, ABS and PA, always test adhesion beforehand.

Package Size Product Code
Kestopur PL 240/40 300 kg/200 l suoras. T1713.333
GREEN CONTENT, renewable and recycled material content

40 %

Type/binder

Polyurethane

Density/specific weight

Resin: approx. 1.60 kg/dm³, Hardener: approx. 1.20 kg/dm³

Lap shear strength

Stainless steel 14 N/mm²
Al/Al ; 9 N/mm²
(28 d 23 °C, 50 % RH.)

Tensile strength

8 N/mm² 7d (DIN 53504)
12 N/mm² 28d (DIN 53504)

Elongation at break

17% (DIN 53504)

Hardness

Shore D 65

Mixing ratio

6 weight parts Kestopur PL 240/40 resin + 1 weight part Kestopur 200/S hardener

Viscosity

Resin: approx. 2.2 million mPas Hardener: approx. 200 mPas

Mixture viscosity

approx. 1.5 million mPas (BrookField T-F 20°C)

Mixture colour

Beige

Pot life

approx. 40 min (120g, 20 °C, 50 % RH)

Open time

max. 1 h 20min / 20 °C

Consumption

300–800 g/m² depending on materials

Pressing time

Min. 6 h / 20 °C

Storage

Unopened at +10–25 °C in a container (1000 l) for 6 months, in smaller containers 12 months. After long storing, stir before use.

Instructions for use

The surfaces to be bonded must be clean and dry. Remove oxides by sanding, grease etc. dirt with Kiilto Cleaner 303. When applying Kestopur PL 240/40 on concrete, relative humidity of the surface can be max. 90 %. Stir Kestopur PL 240/40 resin and add hardener by mixing properly. Apply the adhesive on one or both sides of the materials to be bonded with a suitable equipment. Remove fresh adhesive stains with a dry cloth and clean the surfaces with Kiilto Cleaner 302, acetone or xylen. Hardened adhesive can be removed only mechanically. We recommend gluing at room temperature. Gluing can be carried out at below room temperature (+5–10 °C), but the hardening process will be considerably slower.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.