Kestopur PL 240/15
2-component solvent-free pu-adhesive

Kestopur PL 240/15 is a 2-component polyurethane adhesive for the gluing of metal, wood and insulation materials as well as fiber composite in sandwich panel constructions for the marine industry.

Special features

  • Contains no solvents
  • Excellent adhesion to many materials
  • Paste consistency
  • Non-sag performance is ideal for ridges and walls




Kestopur PL 240/15 gives a very strong bond. Ideal for trowel application. Used in conjunction with Kestopur 200/S hardener. Kestopur PL 240/15 is used for gluing of e.g. metal, glass fiber laminate, insulation wools and foams, ceramic tiles and sandwich panel manufacture. When gluing plastic e.g. PES, PC, PVC, ABS and PA, always test adhesion beforehand. Kestopur PL adhesives are fire classified according to IMO FTPC, Part 5 and have a MED certificate (Wheel-mark).

Package Size Product Code
Kestopur PL 240/15 300 kg/200 l suoras. T1787.333
GREEN CONTENT, renewable and recycled material content

30 %



Density/specific weight

Resin: approx. 1.60 kg/dm³, Hardener: Approx. 1.20 kg/dm³

Lap shear strength

Aluminium/Aluminium +20 °C; 7 N/mm²

Tensile strength

8 N/mm² (DIN 53504)

Elongation at break

10 % (DIN 53504)


Shore D 65

Mixing ratio

5 weight part Kestopur PL 240/15 resin +
1 weight part Kestopur 200/S hardener


Resin: approx. 2.5 million mPas Hardener: approx. 200 mPas

Mixture viscosity

approx. 1.5 million mPas (BrookField T-F 20 °C)

Mixture colour

Beige, grey

Pot life

approx. 15 min. (120 g, 20 °C, 50 % RH)

Open time

max. 25 min after mixing / 20 °C


300–800 g/m² depending on materials

Pressing time

Min. 1 h 30min / 20 °C


Unopened at +10–25 °C in a container (1000 l) for 6 months, in smaller containers 12 months. After long storing, stir before use.

Instructions for use

The surfaces to be bonded must be clean and dry. Remove oxides, grease etc. dirt with a solvent or by sanding. When applying Kestopur PL 240/15 on concrete, relative humidity of the surface can be max. 90 %.
Stir Kestopur PL 240/15 resin and add hardener by mixing properly. Apply the adhesive on one or both sides of the materials to be bonded with a suitable equipment. Remove fresh adhesive stains with a dry cloth and clean the surfaces with Kestopur Cleaner 300, acetone or xylen. Cured adhesive can only be removed by mechanical means. We recommend gluing at room temperature. Gluing can be carried out at below room temperature (+5–10 °C), but then the hardening process will be significantly slower.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the uncured adhesive: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit