Kestopur CR 101 is a two-component, solvent-free, PU elastomer. Kestopur CR 101 is used, for example, in filter end-cappings when petrol and oil resistance is required.
|Package Size||Product Code|
|Kestopur CR 101 200 kg avok.||T2304.300|
Resin approx. 1 kg/dm³, hardener approx. 1.2 kg/dm³, mix approx. 1 kg/dm 3 .
1.0 N/mm² (DIN 53504)
50 % (DIN 53504)
Shore A 55
100 weight part Kestopur resin + 33 weight part Kestopur 200/S hardener.
Resin approx. 500 mPas, hardener: approx. 200 mPas (Brookfield RVT 20 °C)
approx. 400 mPas
approx. 1 min 20 sec
Unopened at +10–25 °C for 6 months. Stir well before use.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.
Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.