Kestopur 600/5 is a two-component polyurethane adhesive for the gluing of metals and filter materials in the filter manufacture.
- Air filters
- Suitable for automatic application
Kestopur 600/5 is a two-component, solvent-free, PU adhesive which gives a strong, yet elastic bond. Kestopur 600/5 is ideal also for automatic application. Used in conjunction with Kestopur 200/S hardener. Kestopur 600/5 is suitable for the gluing of e.g. wood, paper and different types of metals and insulation materials.
|Package Size||Product Code|
|Kestopur 600/5 22 kg/20 l||T2306.020|
|Kestopur 600/5 240kg/200 l||T2306.200|
|Kestopur 600/5 IBC cont||T2306.994|
Resin approx. 1.50 kg/dm³, hardener approx. 1.20 kg/dm³
SS/SS 9 N/mm²
3 N/mm² (DIN 53504)
50 % (DIN 53504)
Shore D 55
5 weight part Kestopur 600/5 resin + 1 weight part Kestopur 200/S hardener
3 800 mPas (Brookfield RVT 4/20, 20 °C)
4 min (20°C, 50 % RH)
max. 8 min from mixing
200–600 g/m² depending on materials
Min. 40 min / 20 °C
Unopened at +10–25 °C for 6 months. Stir well before use.
The surfaces to be bonded must be clean and dry. Remove oxides, dirt, grease, etc. by sanding and using Kiilto Cleaner 303. Stir the Kestopur resin and add the hardener then mix properly. Apply the adhesive on one or both sides of the materials to be bonded. Remove fresh adhesive stains with a dry cloth and clean the surfaces with acetone or xylene. Hardened adhesive can only be removed by mechanical means. We recommend using adhesive at room temperature. However, the gluing can be carried out at lower temperatures (even at +5–10°C), but the curing time will be much longer and spreading properties will suffer under these conditions.
Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.