Kestopur 600/10 T
2-component solvent-free pu-adhesive
Kestopur 600/10 T is a 2-component polyurethane adhesive for gluing of metals and filter materials in the filter manufacture.
- Non-drip 15 sec after mixing (thixotropic)
- Air filters
- Contains no solvents
- Suitable for automatic application
Kestopur 600/10 T is a 2-component, solvent-free PU adhesive with viscosity build-up after mixing. Gives a strong bond. Kestopur 600/10 T is ideal for automatic application. Used in conjunction with Kestopur 200/S hardener. Kestopur 600/10 T is suitable for gluing of e.g. wood, paper and different types of metals as well as filter materials.
|Package Size||Product Code|
|*Kestopur 600/10 T 250 kg/200 l||T2518.200|
Resin: approx. 1,2 kg/l
2 weight part Kestopur 600/10 T resin + 1 weight part Kestopur 200/S hardener
Kestopur 600/10 T -resin: ca. 10.000 mPas (Brookfield RVT 4/20, 20°C)
Kestopur 200/S -hardener: ca. 200 mPas (Brookfield RVT 3/20, 20°C)
Low viscous liquid, after 15 sec a thixotropic paste
Approx. 9-10 min (20°C, 50 % RH)
Unopened at +10–25 °C for 6 months. Stir well before use.
The surfaces to be bonded must be clean and dry. Remove oxides by sanding, grease etc. dirt with a cleaner. Stir Kestopur resin and add hardener by automatic equipment. Apply the adhesive with a spreading machine on one of the surfaces to be bonded. Resin/hardener mix is fluid after mixing, but after around 15 sec its consistency becomes "butter-like" and stays on vertical surfaces without dripping. Remove fresh adhesive stains with a dry cloth and clean the surfaces with acetone or xylene. Cured adhesive can be removed only by mechanical means. We recommend using adhesive at room temperature. However, the gluing can be carried out at lower temperatures (even at +5–10°C), but then the curing time will be much longer and spreading properties will suffer.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact with and exposure to the uncured product: use safety gloves. Refer to the specific material safety data sheet. Go to www.kiilto.com for more information on product and package disposal.