Kesto Trennmittel 2000
Kesto Trennmittel 2000 is a high-viscous release agent.
The product is a high-viscous release agent that prevents overflow adhesion to the press plates. The product is a wax emulsion. Does not contain silicone or oil. After drying the film resists dirt. Kesto Trennmittel 2000 does not impair metal- or rubber surfaces or affect the following coating work, e.g. lacquering.
|Package Size||Product Code|
|Kesto Trennmittel 2000 5 l astia||T1955.005|
High-viscous wax emulsion, release agent
7 mm 2 /s
In unopened containers at +20 °C for 24 months.
Apply an even, thin layer of Kesto Trennmittel 2000 on the press plate surfaces using a spatula or a fibre cloth. Allow to dry over night. If needed, shorten the curing time by heating the pressing plates up to +60 °C. If the release agent remains liquid while pressing, it might absorb into the surface and impede the after-treatment.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact with and exposure to the uncured product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.