Akvapur LL 2
Akvapur LL 2 is a sprayable sole adhesive for the footwear industry.
- The bond is elastic and strong
- Good thermal resistance and resistant to chemicals
- Contains fluorescent UV-agent
Suitable for gluing leather, wood, metal, textiles, polyurethane (PUR), polyvinyl chloride (PVC) and TR-Primer halogenated, vulcanised natural rubber and synthetic rubber mixtures.
|Package Size||Product Code|
|Akvapur LL 2 15 kg||T3838.015|
600 mPas (Brookfield RVT, +20° C)
Min. activation temperature: 70°C.
In room temperature 30-90 min
In unopened containers at +20 °C for 6 months.
Apply an even uniform coat of the adhesive onto the board blanks with an air assisted airless spray gun (Airmix®) or a high pressure spray gun. Let the adhesive dry until transparent. Activate the surfaces with heat and press them together.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.
Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.