Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto SR DF Pikamärkätilatasoite 2-10 (40) mm

Dust reduced quick setting plaster for levelling walls and ceilings. Particularly for straightening concrete and blocks walls prior to waterproofing and tiling. Cementitious.

Special features

  • very fast and dust reduced wall plaster for wet areas
  • dry and wet areas
  • ready surface to receive waterproofing
  • drying time in overall plastering approx. 4 h, partial plastering 20 mm layer, 24 h
  • overall plastering 2–10 mm, partial plastering 2–40 mm

Application

Kiilto SR DF is suitable for smoothing interior walls and ceilings. It can also be over plastered with other Kiilto wall plasters depending on the application. Not suitable for areas that are permanently under water (for example, swimming pools).

Coverage

1 mm layer/m² solid matter weights approx. 1.5 kg

Package Size

EAN Code

20 kg 6411512285207
Package Size 20 kg
EAN Code 6411512285207
 

Type/binder

Polymer-cement-sand-based powder

Colors

grey

Bond strength

> 0,5 MPa (EN 998-1)

Compression strength

class CSIV (EN 998-1)

Mixing ratio

5.2–5.8 l water / 20 kg bag

Working time

20-30 minutes (+18 °C)

Application temperature

recommendation +18–20 °C, lowest operating temperature +5 °C

Package sizes

20 kg bag

Substrate humidity

concrete < 90 % RH

Coverage

1 mm layer/m² solid matter weights approx. 1.5 kg

Layer thickness

overall plastering 2–10 mm, partial plastering 2–40 mm

Max. grain size

approx. 0.5 mm

Coatable

In overall plastering approx. 4 h, in partial plasterings 24 h 20 mm and 3 d up to 40 mm.

Storage

In an unopened package 6 months in dry conditions

Instructions for use

The surfaces to be plastered must be solid, clean and free from dust. Weak and loose particles must be removed carefully. Dry surfaces must be lightly moistened prior to plastering.

Strew SR DF powder slowly in cool (+18–20 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 2-3 min and then remix once again. The plaster is applied by hand with a steel trowel. Surface can be after-treated by moisturizing with water spray.

Carry out plastering at the normal room temperature. Prevailing conditions, such as temperature of the room, plaster and water, substrate quality and humidity and relative humidity affect significantly the setting and drying time. Our recommendations can therefore be used as a guideline only.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1CELEEDNordic EcolabelMade in Finland, Key flag