Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto 66 Yleis-/puuliima

Kiilto 66 is a PVAc-based multipurpose adhesive for wood, plywood, veneer, chipboard, paper, cardboard, fabric, leather and mosaic etc. Suitable also for fixture installation and tongue- and groove gluing of industrial parquet.

Special features

  • multipurpose adhesive for construction and homes
  • water-based

Application

A water-based PVAc multipurpose adhesive for gluing of wood, paper, cardboard, fabric and ceramics. Suitable for tongue- and groove gluing of industrial parquet. Complies with M1-emission classification for building products. The adhesive is fast-bonding and has a short pressing time. Kiilto 66 is a D2-adhesive suitable for indoor use.

Package Size

EAN Code

3 l 6411511030303
10 l 6411511030112
0,33 l 6411511030334
0,75 l 6411511030754
Package Size 3 l
EAN Code 6411511030303
 
Package Size 10 l
EAN Code 6411511030112
 
Package Size 0,33 l
EAN Code 6411511030334
 
Package Size 0,75 l
EAN Code 6411511030754
 

Density/specific weight

Approx. 1 kg/dm³

pH

approx.7

Viscosity

16500 mPas (Brookfield, RVT +20 °C)

Open time

5 - 10 min

Pressing time

10 - 20 min (unstressed pieces)

Minimum film forming temperature

+ 5 - 8 °C

Package sizes

1/3 l and 3/4 l plastic bottle
3 l and 10 l plastic container

Wood moisture content

6 - 15 %

Frost resistance

Freezing

Storage

In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Instructions for use

Apply the adhesive one-sided in an even layer. Position the pieces together and press. Pressing time depends on the prevailing working conditions. The adhesive joint is pale after drying. Remove fresh adhesive stains with a cloth moistened with water.



Carry out work at usually prevailing room temperature. Both the materials and adhesive should be allowed to reach the room temperature. Prevailing conditions, such as temperature of the room, adhesive and substrate, air humidity, substrate quality and humidity and the amount of adhesive affect significantly setting and drying time.



The adhesive does not stain wood. If the adhesive or substrate contain iron or rust, they, together with the wood extractive, may cause staining.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1LEEDMade in Finland, Key flag