Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kestopress 3200 V

Kestopress 3200 V is a EN 204/D3 class PVAc wood adhesive for veneering and lamination.

Special features

  • 1-component

Application

Kestokol 3200 V is a mostly non-discolouring reactive PVAc-dispersion adhesive, which is well suited for veneering as well as massive wood, parquet, bathroom furniture, laminate gluing as well as for foil lamination of wood based boards with a hot press. Due to its D3 durability class, Kestopress 3200 V -adhesive can be used for interior applications that have frequent exposure to high humidity, or running or condensation water, or for exterior applications which are not exposed to weather.

Kestopur 3200 V adhesives are fire classified according to IMO FTPC, Part 5 and have a MED certificate (Wheel stamp).

Package Size

Product Code

Kestopress 3200 V 100 kg T2523.100  
Kestopress 3200 V IBC cont T2523.994  
Kestopress 3200 V Schütz cont T2523.996  
Kestopress 3200 V kontti T2523.992  
Kestopress 3200 V 15 kg T2523.015  
Package Size Kestopress 3200 V 100 kg
Product Code T2523.100
 
Package Size Kestopress 3200 V IBC cont
Product Code T2523.994
 
Package Size Kestopress 3200 V Schütz cont
Product Code T2523.996
 
Package Size Kestopress 3200 V kontti
Product Code T2523.992
 
Package Size Kestopress 3200 V 15 kg
Product Code T2523.015
 

pH

3.3

Colors

White, transparent after drying

Viscosity

5000 mPas (Brookfield, RVT +20 °C)

Open time

See instructions for use.

Consumption

120–150 g/m² (solid wood)
80–120 g/m² (veneering and foil lamination)

Pressing time

18 min. (Pine, 12 % wood moisture, temperature 20 °C, 65 % RH)

Minimum film forming temperature

+4 °C

Wood moisture content

6 - 15 %

Storage

Unopened at +20 °C in a container for 3 months, in smaller packages for 6 months. After long storing, stir before use.

Instructions for use

Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold, hot or high frequency press. The final strength and water resistance of the bond is reached within 7 days.

The consumption affects the open time of the adhesive as follows (pine 12 % wood moisture, 23 °C, 50 % RH):

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1IMOD3Made in Finland, Key flag