Kiilto F
Kiilto F is a one-component, silyl modified, adhesive sealant for the gluing and sealing of metal, fibreglass and different types of plastics in the boat and transport industries.
Special features
- Strong bond
- Vehicle side glasses
- Does not contain isocyanates or solvents
- Good resistance against chemicals
- Good resistance against weathering and UV radiation
- Paintable
Links
Materials
Ideal for the bonding and sealing of fibreglass and metals in structural gluing applications when fast curing and high bond strength is needed. Suitable also for the gluing of, for example, side glasses in vehicle industry applications. Complies with the M1 Emission Classification for Building Materials. Elastic, yet a mechanically strong bond. High viscosity, fast bonding. Almost odourless. Almost non-shrinking. Paintable with water-based latex and solvent-based paints.
Package Size | Product Code |
---|---|
Kiilto F musta 600 ml | T2448.933 |
Silyl modified polymer
approx. 1.45 kg/dm³
black
- SS/SS 4.2 N/mm²
3.0 N/mm² (DIN53504)
250 % (DIN53504)
Shore A 55
approx. 12 million mPas (BrookField H-Path T-F/0.5 +20 °C)
approx. 10 min (23°C, 50 % RH)
approx. 10 min (23°C, 50 % RH)
3 mm/d, approx. 10 mm/7 d (23 °C/50 % RH)
approx. 45 min (23°C, 50 % RH)
+1–40°C
600 ml sausage
-40–+90°C constantly,
+180 °C / 60 min
Unopened at +10–25 °C for 12 months.
Materials to be glued must be dust-free, dry and free from grease and oil. When gluing large area surfaces or in very dry conditions, we suggest light spraying with water (approx. 5–10 g/m 2 ). We recommend cleaning surfaces with Kiilto Cleaner 303 and priming with Kiiltoflex Metalliprimer. Uncured adhesive can be removed with xylene or acetone, cured adhesive only by mechanical means.
Gluing of glass: Ensure that the glass has black ceramic coating on the areas where the adhesive will be spread. Remove grease and oil from the surfaces to be bonded with Kiilto Cleaner 303. Prime both surfaces with Kiilto Metalliprimer and let dry for at least 10–15 minutes. Apply Kiilto F on the black ceramic coating and press the glass onto the body carefully within the adhesive's open time. Use suitable spacers to get a 3–5 mm wide seam.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.