Kiilto Pro WR LOT is an EN 204/D2 durability class PVAC adhesive for wood.

Special features

  • 1-component
  • M1 classification
  • Long open time
  • Includes renewable raw materials  




Kiilto Pro WR LOT is a PVAc dispersion adhesive. Kiilto Pro WR LOT is used for gluing of glued boards, lathing work, veneering, assembly gluing, and gluing of laminate when a long open time is required. The D2 class Kiilto Pro WR LOT can be used indoors, in glued joints which are in contact with water or moisture only for short periods of time.

Package Size Product Code
Kiilto Pro WR LOT IBC cont T2569.994
GREEN CONTENT, renewable and recycled material content

5 %

Density/specific weight

1,07 kg/l




12500 mPas (Brookfield, RVT +20 °C)

Open time

20 min (pine, 12 % wood moisture, 20 °C, 50 % RH)

Pressing time

15 - 30 min (20 °C)

Minimum film forming temperature

+ 3 °C

Air humidity

50 - 70 % RH recommended

Wood moisture content

6 - 15 %


In unopened containers, above +1 °C, for 12 months.

Instructions for use

Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold, hot or high frequency press. The final strength of the bond is reached within 7 days.

If in contact with iron, some discolouration in the adhesive bond may also occur.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
EN 204 D2 water resistance classification
Key Flag