Kiiltomelt S 211 on EVAC-based hot melt adhesive for bonding edge bands.

Special features

  • M1 classification
  • Suitable also for machines that pre-gum the edge banding

Materials

Product Information
Application

Kiiltomelt S 211 is an edge banding hot melt adhesive also suitable for machines that pre-gum the edge banding. The adhesive melts easily, is easy to apply and does not web. Suitable for melamine impregnated paper edge strips, PVC-edge strips/laths, ABS-edge strips/laths, veneer strips, laminate and solid wood laths gluing. Adhesive has M1-emission classification for building products.

Package Size Product Code
Kiiltomelt S 211 beige 15 kg T7301.015
Kiiltomelt S 211 valkoinen 15 kg T7300.015
Technical Information
Colors

beige and white

Softening point

110 °C (DIN 52011)

Viscosity

110 000 mPas, 200 °C, 5 s¯¹

Working conditions

+18 - 22 °C

Application temperature

180 - 205 °C (on the applicator roll)

Package sizes

25 kg

Air humidity

60 - 70 %

Wood moisture content

7 - 10 %

Storage

In unopened containers, at max. +40 °C, for 36 months

Instructions and Safety
Instructions for use

The adhesive is melted in the adhesive tank. The minimum feed speed of the machine is 12 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to avoid the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, because otherwise the adhesion and flowing properties of the adhesive may weaken.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
Key Flag