Kiiltomelt 1240
Hot melt adhesive

Kiiltomelt 1240 is an EVAC-based hot-melt adhesive for the pleating of air filters.

Special features

  • Good hot tack




Kiiltomelt 1240 hot-melt adhesive is used for the pleating of air filters. The adhesive has high melt viscosity and hot tack. All components of the adhesive comply with the food packaging regulation FDA 175.105.

Package Size Product Code
Kiiltomelt 1240 10 kg T7229.010
GREEN CONTENT, renewable and recycled material content




Softening point

106 °C


13 000 mPas, 160 °C, 10 s¯¹

Open time

medium long

Application temperature

150 - 180 °C

Package sizes

10 kg


In unopened containers, at max. +40 °C, for 36 months

Instructions for use

Suitable application methods are by nozzle and roller.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Food contact material certification
Key Flag