Kiiltomelt 1210 is an EVAC-based hot melt adhesive for pleating of air filters.

Special features

  • Long open time
  • Light coloured
  • Odorless
  • Elastic

Materials

Application

Kiiltomelt 1210 is a very elastic hot melt adhesive suitable for pleating of air filters. The adhesive has some shrinkage after cooling.

Colors

White

Softening point

108 °C (DIN 52011)

Viscosity

6500 mPas, 160 °C, 100 s¯¹

Open time

long

Application temperature

150–180 °C

Instructions for use

Suitable application methods are nozzle and roller. Adhesive can be foamed.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
Key Flag