Kiilto TM DF Seinän pikatäyttömassa 5-20 (70) mm

Quick setting, light wall plaster for dry and wet areas. Especially suitable for, for example, filling pipe channels. Layer thickness in holes and chases 5-70 mm, in over plastering 5-20 mm. Can be treated with waterproofing membranes after 24 hours. Cementitious.

Special features

  • cementitious binder, light filled, dust reduced, fast curing
  •  non-shrinking
  •  dry and wet areas
  •  drying time 24 h
  •  partial levelling 5-70 mm, over plastering 5-20 mm
  •  coverage 1,4 kg/m²/mm


   

Materials

Product Information
Application

Kiilto TM is a quick setting wall plaster for rock material interior walls. The finished surface can be tiled or treated with Kiilto waterproofing membrane. It can also be over plastered with other Kiilto wall plasters depending on the application.

Package Size EAN Code
20 kg 6411513953204
Technical Information
Bond strength

> 0,5 MPa (EN 998-1)

Colors

Dark grey

Compression strength

CSIV (EN 998-1)

Coverage

1 mm layer/m² solid matter weights approx. 1.4 kg

Layer thickness

partial levelling 5-70 mm, over plastering 5-20 mm.

Max. grain size

approx. 3 mm

Mixing ratio

4.0-4.8 l water / 20 kg bag

Package sizes

20 kg bag

Storage

In an unopened package max. 6 months in dry conditions.

Substrate humidity

concrete < 90 % RH

Working conditions

recommendation: +18–20 °C, lowest operating temperature +5 °C

Working time

20-30 minutes (+18 °C)

Instructions and Safety
Instructions for use

The surfaces to be plastered must be solid, clean and free from dust. Weak and loose particles must be removed carefully. Dry surfaces must be lightly moistened prior to plastering.

Strew Kiilto TM DF powder slowly in cool (+18–20 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 2-3 min and then remix once again. Moisten surface with water before plastering. Apply plaster on a matt surface using, for example, a steel trowel. The surface can be finished by moistening it before the final smoothing.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
CE marking
LEED
The Nordic Swan Ecolabel
Key Flag