Kiilto Pro Solid
PVAc-based adhesive with a high solid content for laying step sound insulation cork, mosaic and block parquet. Depending on the parquet type, suitable subfloors are sufficiently strong concrete, floor levelling or plywood.
- high solid content
- for laying mosaic parquet and step sound insulation cork
- coverage ca. 1.7 m²/l
For laying mosaic parquet flooring and step sound insulation cork. Well suited also for gluing of solid block parquet on plywood, but only if mechanical fixing is also used. Suitable to be used with underfloor heating. Has M1 Emission Classification for Building Materials.
|Package Size||EAN Code|
|15 l / 19 kg||6411511375152|
approx. 1.3 kg/l
Freezing (adhesive joint is cold-resistant)
approx. 20 min (+20 °C, 50 % RH)
In unopened containers, above +1 °C, for 18 months. After long storing, stir before use.
concrete: max. 3,0 w-% or 80 % RH
wood: 8–12 %
Suitable substrates are steel-trowelled concrete, plywood, chipboard, cork board and wooden floor. Substrate must be dry, solid, smooth and free from dust and other materials that might impair adhesion. Concrete subfloor can be levelled with a mosaic parquet subfloor levelling compound produced by Kiilto Oy, if needed.
Carry out work at normal room temperature and humidity. Allow parquet boards and adhesive to acclimatise to the normal room temperature and humidity. Apply the adhesive evenly with a notched trowel to an area that can be covered with parquet while the adhesive surface is still fresh. Press the parquet sheets onto the surface. Check that the back of the parquet is fully covered with adhesive. Leave a clearance of 10–15 mm between solid structures, e.g., wall and parquet. Sanding is recommended after 3–6 days at the earliest.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.