Kiilto Rappausverkko

Alkali-resistant, polymer-coated Kiilto Fibreglass Mesh reinforcement for façade render coats. Mesh size 6 x 6 mm. Also for exterior applications.



Package Size EAN Code
Kiilto Rappausverkko 50 jm 6411512046501


Package sizes

Roll size: 1.0 m x 50 linear metre


Coated fibreglass mesh, 210 g/m2

Instructions for use

The substrate must be sufficiently solid and sound. Remove any irregularities and cement laitance before installing the mesh.

Apply render in a uniform coat on the area to be reinforced by hand or by machine. Use Kiilto KL fibre render. Install the mesh on the wall with 100 mm overlaps. Pay attention to mesh edges; do not let them curve upwards. See that the mesh is totally embedded into the wet base-coat render.

Place diagonally cut pieces, size 500 x 500 mm, of Kiilto Fibreglass Mesh in the corners of openings on the wall level. Place the pieces in a 45 degree angle to the opening. Reinforce all in- and outside corners with Kiilto Fibreglass mesh corner pieces. We recommend doing this prior to the actual reinforcement work.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact with the product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, go to