Kiilto Fibreglass mesh corner pieces are used as render reinforcement for interior and exterior corners. Profile is alkali-resistant
Dimensions: 8 cm x 12 cm x 250 cm
Mesh size: 5 mm x 5 mm
The corners to be reinforced must be sufficiently solid and straight.
Press a Kiilto Fibreglass mesh corner piece gently onto a fresh compound bed (e.g., Kiilto KL or Kiilto OT). Press the corner piece firmly into place with a trowel, so that the compound presses through the mesh. This ensures that the piece is embedded properly into the compound. Place the reinforcement mesh, if used, to overlap with the piece.
In levelling work, follow the levelling compound manufacturer's instructions
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.