Kiilto Pro W 3035
EN 204/D3 adhesive

Kiilto Pro W 3035 is an EN 204 D3 classified PVAC adhesive for wood.

Special features

  • 1-component
  • non-discolouring
  • Suitable for hardwood




Kiilto Pro W 3035 is a non-discolouring reactive PVAc-dispersion. adhesive, which is well suited for veneering as well as massive wood, parquet, bathroom furniture, laminate gluing and foil lamination of wood based boards with a hot press. Due to its D3 durability class, Kiilto Pro W 3035 -adhesive can be used for interior applications that have frequent exposure to high humidity, or running or condensation water, or for exterior applications which are not exposed to weather

Package Size Product Code
Kiilto Pro W 3035 15 kg T2464.015
Kiilto Pro W 3035 IBC cont T2464.994



White, after drying transparent


12000 mPas (Brookfield RVT +20 °C)

Open time

See instructions for use


100 - 150 g/m²

Pressing time

18 min. (Pine, 12 % wood moisture, temperature 20 °C, 65 % RH)

Minimum film forming temperature

+6 °C

Wood moisture content

6 - 15 %


In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Instructions for use

Check that the joints fit well. Apply adhesive one sided evenly. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a hot or high frequency press. The final strength and water resistance of the bond is reached within 7 days.

With some wood types the adhesive’s acidity may cause discolouration in the adhesive bond. If in contact with iron, some discolouration in the adhesive bond may occur.

The consumption affects the open time of the adhesive as follows (pine, 12 % wood moisture, 23 °C, 50 % RH):

Adhesive amount (g/m²)           
Open time (min)                   
Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the uncured product: use safety gloves. Refer to the specific material safety data sheet. Go to for more information on product and package disposal.