Kiilto Pro Silicone Remover
Silicone and adhesive sealant remover
A sprayable, ready-to-use silicone remover. Softens the hardened silicone and adhesive sealant, making it easier to remove the sealant joint.
Special features
- a highly effective aerosol
- suitable for removing all types of silicones
- also suitable for removing MS- and SMP- based adhesive sealants
Links
Materials
A ready-to-use remover for silicone, MS- and SMP- based adhesive sealants. Softens the hardened sealant and makes it easier to remove the joint.
| Package Size | EAN Code |
|---|---|
| Kiilto Pro Silicone Remover 400 ml | 6411513545942 |
400 ml aerosol
In unopened package, between +5–25 °C, max. 3 years.
First remove as much of the silicone as possible, for example with a sharp knife. Shake the aerosol canister before use. Spray the remover over the remaining silicone. Leave on for about 10 minutes. Remove the softened mass with a wooden stick, for example. Repeat the treatment if necessary. Before repeating the treatment, rinse the treated areas with water and allow to dry.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.