Kiilto Pro Sanitary Silicone
Sanitary silicone
M1-classififed low odour neutral silicone sealant for sealing expansion joints, junctions between walls and floors and other material boundaries and penetrations in wet areas. Contains antifungicide. Also outdoors.
Special features
- thermal resistance +120 °C
- contains antifungicide
- low odour
- not overpaintable
- for interior and exterior use
Links
Materials
Kiilto Pro Sanitary Silicone is a one-component neutral silicone. Complies with the requirements EN 15651-3:2012 standard. Not for aquariums or natural stone, eg. marble. For mounting mirrors and toilet seats we recommend Kiilto Masa. When installing single small tiles and higher thermal resistance is needed (+150 °C), you can use grey silicone.
| Package Size | Color | EAN Code |
|---|---|---|
| 310 ml | 00 transparent | 6411513510315 |
| 310 ml | 10 traffic white | 6411513511312 |
| 310 ml | 11 linen | 6411513550311 |
| 310 ml | 28 sand | 6411513717318 |
| 310 ml | 29 light beige | 6411513526316 |
| 310 ml | 30 beige | 6411513551318 |
| 310 ml | 31 toffee | 6411513512319 |
| 310 ml | 33 cocoa | 6411513527313 |
| 310 ml | 36 terracotta | 6411513571316 |
| 310 ml | 38 ground brown | 6411513528310 |
| 310 ml | 39 marble white | 6411513513316 |
| 310 ml | 40 concrete | 6411513547311 |
| 310 ml | 41 stone | 6411513569313 |
| 310 ml | 42 steel | 6411513570319 |
| 310 ml | 43 pearl | 6411513530313 |
| 310 ml | 44 iron | 6411513652312 |
| 310 ml | 46 silver | 6411513572313 |
| 310 ml | 48 antracite | 6411513718315 |
| 310 ml | 50 graphite black | 6411513549315 |
| 310 ml | 90 iceblue | 6411513553312 |
| 310 ml | 94 smoke | 6411513654316 |
available in several colours
5 x 5 mm joint, approx. 12 m / cartridge
approx. 2 mm in 24 h and approx. 10 mm in
a week
n. 1,0 kg/dm³
Shore A approx. 20
5–20 min (20 °C, RH 50 %)
Store in a tightly closed original package in a dry, cool place (below + 25 °C). Best before date on the package.
-40...+120 °C, grey +150 °C
moisture curing neutral silicone polymer
optimal temperature is +18–20 °C, however within the range +5–40 °C
The surface to be jointed must be dry, free from dust and grease.
Solid foam plastic profile can be used as joint bottom filler.
Unscrew the cap from the extrusion tip. Cut open the cone at the
front end of the cartridge. Screw the extrusion tip in place and cut it to
the desired size. Press silicone to the joint and smooth it immediately
by using a trowel or fingertip moistened with clean water. Leave the
extrusion tip in place and close the cartridge with the cap properly
after use. To facilitate cleaning, apply, for example, masking tape on
both sides of the joint. Remember to remove the tape right after
application.
When renewing silicone joints, the old silicone must be removed.
The prevailing conditions, such as air temperature, the temperature of the silicone and the joint, substrate’s material and air humidity as well as the amount of silicone applied has a strong impact on the skin time
and vulcanization.
Some paints, detergents and solvents contain chemicals that may
discolor silicone, either in direct contact with the silicone or when
released in the air. Also, similar compounds may be released from
some wood types (including heat-treated radiata pine) and acetoxy silicones (so-called acetic silicones). Some plastics and rubbers
contain plasticizers that may also react with silicone. If needed,
we recommend preliminary tests prior to use. If using ceramic tile
paints, use acetic Kiilto Pro Silicone E Sanitary Silicone.
Silicone joints' lifespan is limited. It depends on the room’s utilization
rate, cleaning and ventilation. Check the condition of joints in wet
rooms regularly and replace them with new ones when necessary, at least every 5 years.
Kiilto Pro Sanitary Silicone adheres well on different materials (e.g. ceramic tiles, glass, furniture materials). However, preliminary adhesion tests are recommended to ensure proper adhesion. For transparent
plastics (PC, PMMA) we recommend clear silicone.
When sealing joints in one location, ensure that all silicone cartridges
have the same batch number.
The colours of Kiilto Pro Sanitary Silicone have been toned in a neutral light to match the colours of Kiilto Pro Tile grout. Light in different light sources is different. Thus, the lighting used in the space can affect how the color of the silicone looks.
The information given in this product data sheet is based on our tests
and our practical knowledge. The technical data is defined in
standard conditions. Variations in local working conditions and
methods will affect the product performance and result. We
guarantee the high quality of our products according to our Quality
Management System. No liability can be accepted for the incorrect use of the product or prevailing conditions, over which we have no
control. Thus, we cannot be held responsible for the final result. The
correct use of the product presupposes that the user has made
him/herself aware of the contents of the working instructions and
procedure guide if provided.
Avoid unnecessary skin contact and exposure with the fresh product,
use safety gloves. Refer to material safety data sheet. For more
information on product and package disposal, visit www.kiilto.com.