Kiilto Pro Pluschlor

Disinfecting Cleaner

Store only at 5-25°C in original, tightly closed container, protected from sunlight. Protect from frost. Sodium hypochlorite is more stable at lower temperatures

Shelf life 12 months.

Keep the container in a well-ventilated place. Do not store together with acids and ammonia salts. To be avoided: acids, ammonia compounds, acetic anhydride, organic materials, hydrogen peroxide, metallic salts, copper, nickel, iron.

Dispose unused product and the packaging in accordance with local requirements. Do not discharge unused product on the ground, into water courses, nor into sewer.

Use biocides safely. Always read the label and product information before use.

The product is used to disinfect non-porous surfaces in PT2 and PT4 fields of use. The biocidal product is applied by foaming or by immersing small items into the diluted solution. The working solution concentration is 57 ml / 1 L to water, corresponding to 1500–2900 ppm active chlorine, depending on the age of the batch, and contact time for PT4 and PT2 (healthcare sector) - 15 min, for PT2 (non-healthcare sector) - bacteria and viruses 5 minutes, yeasts and fungi - 15 minutes; and frequency once daily. The concentration is based on a 12-month worst-case scenario. If the active chlorine concentration can be checked, the solution concentration can be adjusted based on the active chlorine amount to 1500 ppm.

Thoroughly pre-clean the surfaces to be disinfected by rinsing those with pure water. Foam the diluted product directly on the surfaces or pour diluted product to the floor drain. Alternatively, dip the the item to be disinfected into the dilution. the solution for dipping shall be used only once. Make sure that the surfaces remain wet for the allocated contact time. Washing solution temperature needs to be between 20- 30 °C. Rinse handled surfaces with clean water and dry the surfaces with a squeegee.

Non-biocidal use
For foam and wash methods and bleaching (non-biocide use): dilution can be adjusted to 20 - 40 ml / 1l of water. Rinse the surface first with water. Apply the product as foam onto the surface using a low-pressure washer or foaming device. Clean the surfaces with a scrubbing tool or machine. Ensure that the surfaces remain wet for the required contact time. Rinse the treated surfaces with clean water and dry them thoroughly with a squeegee.

Strong solutions may stain light metal surfaces. Always check the compatibility of the product with the surfaces.

When handling the product or applying in-use dilutions, wear
• chemical resistant gloves (EN 374)
• eye/face protection (EN 166)
• protective coverall (at least type 4, EN 14605)
• suitable protective footwear (EN 13832)
During foaming use of respiratory protective equipment (RPE) providing a protection factor of 40 is mandatory in addition to the previous PPEs. At least a powered air purifying respirator with helmet/hood/mask (TH3/TM3), or a full-face mask with particle filter P3 is required.
Avoid contact with eyes and skin.
Avoid splashes and spills during mixing and loading (dilution) and application.
Wash your hands after handling.
After disinfection, treated surfaces should be thoroughly rinsed with water.
After disinfection by coarse foaming, the treated area can be re-entered only when the ambient air concentration of chlorine is ensured to be below 0.5 mg/m3.
Do not let general public enter the treatment area during the disinfection process and until surfaces are completely dried.
Sodium chlorate may be formed during storage. To avoid increasing formation of this degradation product, do not exceed the established shelf life of the biocidal product.

Dispose unused product and the packaging in accordance with local requirements.
Do not discharge unused product on the ground, into water courses, nor into sewer.

FIRST AID INSTRUCTIONS:
IF INHALED: Move to fresh air and keep at rest in a position comfortable for breathing. If symptons: Call 112/ambulance for medical assistance.
IF SWALLOWED: If conscious: Immediately rinse mouth. Give something to drink if the exposed person is able to swallow. Do NOT include vomiting. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor: Immediately initiate life support measures, thereafter, call a POISON CENTER.
IF ON SKIN: Immediately wash skin with plenty of water. Thereafter take of all contaminated clothing and wash it before reuse. Continue to wash the skin with water for 15 minutes. Call a POISON CENTER or a doctor.
IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing for at least 15 minutes. Call 112/ambulance for medical assistance.
Information to Healthcare personnel/doctor: Immediately initiate life support measures, thereafter, call a POISON CENTER.

EMERGENCY MEASURES TO PROTECT THE ENVIRONMENT IN CASE OF ACCIDENT
Do not release into the environment. Do not let product enter drains. Damp up and absorb on an inert material.

For food commodities, ensure that the concentration of chlorate present in food does not exceed the MRL values set in Regulation 2020/749.

Wastewater shall not be discharged into an individual waste water treatment system.

Authorisation number: Fl-2025-0012.