Kiilto Pro Grip
Tackifier adhesive
Rollable tack adhesive for all types of loose-lay floor coverings. Builds a tacky film fast and develops a permanently tacky surface. Covering is later removable and the adhesive can be removed by washing. 2-ethyl hexanol-free. Also suitable for underfloor heating.
Special features
- ready-to-use and rollable tack adhesive
- for gluing loose lay floor coverings
- develops a tacky film fast
- permanent tack
- high coverage 6–12 m²/l
- 2-ethyl hexanol-free
Links
Materials
A permanent tack adhesive for all kinds of loose lay textile and vinyl floor coverings and tiles in dry indoor areas.
Package Size | EAN Code |
---|---|
5 l | 6411513793053 |
10 l | 6411513793107 |
+18-25 °C
Short hair roller: 6 – 10 m²/l
Plain steel trowel: 8–12 m²/l
1.0 kg/l
5 l, 10 l
In unopened containers, above +1 °C, for 1 year. After long storing, stir before use.
concrete: max. 3.5 w-% or 85 % RH
Acrylate copolymer
Remains tacky after tacky film formation.
Suitable subfloor is even, dry and dust-free levelling compound, construction board or existing flooring. We recommend smoothing the concrete substrate with a suitable Kiilto low alkali levelling compound, which will reduce the risk of damage in the covering or adhesive due to excess alkaline moisture. Ensure before installation that the existing flooring is properly bonded to its substrate, all wax residuals are removed from the surface and the substrate is suitable for gluing.
Apply Kiilto Pro Grip on the surface with a short hair roller. You can also use a steel trowel. Adhesive’s film tackiness depends on the absorbency of the subfloor and the amount of adhesive used. Allow to dry to a tacky film and then lay the covering according to manufacturer’s instructions. Depending on conditions, forming of a tacky film may take 20–45 min. Floor coverings are installed normally, but the adhesive surface must be tacky before the laying. Follow the floor covering manufacturer’s instructions on the correct adhesive amount.
Kiilto Pro Grip can be washed off by spreading alkaline detergent, e.g. water-diluted Kiilto Pro Prepaint Cleaner (1 part Prepaint Cleaner and 5 parts water), on the adhesive. Let the cleaner take effect, then remove softened adhesive by hand or machine and rinse the surface with clean water. Porous substrates such as levelling compound or construction board can be damaged in cleaning. When washing off Kiilto Pro Grip from an old covering, ensure that it resists alkaline detergent.
Porous subfloors can be primed with thinned Kiilto Pro Start Primer (1 part Start Primer and 4 parts water).
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.