Kiilto PrimerOne
Fast drying primer

A primer to improve adhesion between Kiilto waterproofing membrane and levelled, concrete or board substrate in wet room areas. Ensure substrate’s suitability for use in a wet room. Fast drying. Water-based.

Special features

  • fast drying
  • water-based
  • also for priming the substrate before applying wall plaster or floor levelling compound.

Links

Materials

Application

A fast drying primer for waterproofing membranes. Can also be used with Kiilto floor levelling compounds and wall plasters.

Package Size EAN Code
1 l 6411514201014
3 l 6411514201038
10 l 6411514201106
Application temperature

+10–25 °C

Colors

Yellow

Coverage

undiluted approx. 8 m²/l

Curing rate

30 min (depending on prevailing conditions)

Density/specific weight

approx. 1

Frost resistance

Freezing

Mixing ratio

Under waterproofing membranes, use primer undiluted or diluted 1:1. Thinning prolongs the drying time of the primer.

Under Kiilto levelling compounds:
- Concrete and cement-based levelling compounds (dilute: 1 part primer and 4 parts water)
- Floors with old adhesive remains, such as synthetic resin and bitumen adhesive (use undiluted)
- Moisture-sensitive substrates, such as gypsum boards and wooden substrates (use undiluted)
- Board floors, such as plywood, gypsum plasterboard etc. (use undiluted)
- Non-absorbent substrates, such as paint and clinker (use undiluted)

Package sizes

1l, 3l and 10l

Storage

In unopened containers, above +1 °C, for 1 year.

pH

approx. 8

Instructions for use

Remove cement laitance, existing surface materials, sanding dust, loose particles and grease from the subsurface. Sand or grind by machine, if necessary. Shake well before use. Apply the primer as a thin, even layer onto the surface by using, for example, a roller, brush or trowel. Rub firmly. The primer layer must be dry before the membrane is applied. Study Kiilto waterproofing procedure guide before starting the job.

Under Kiilto levelling compounds:
- Concrete and cement-based levelling compounds (dilute: 1 part primer and 4 parts water)
- Floors with old adhesive residue, such as synthetic resin and bitumen adhesive (use undiluted)
- Moisture-sensitive substrates, such as gypsum boards and wooden substrates (use undiluted)
- Board floors, such as plywood, gypsum plasterboard etc. (use undiluted)
- Non-absorbent substrates, such as paint and clinker (use undiluted)

Concrete and levelled substrates can be smoothed immediately after priming. Let building boards, non-absorbent surfaces and surfaces with old adhesive residue dry before levelling. The prevailing conditions can strongly affect the drying time. Levelling must be done within 24 hours after priming at the latest.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to the material safety data sheet. For information on product and package disposal, visit www.kiilto.com.