Kiilto Premium extra strong fix

Elastic power glue for wood, concrete, stone and glass as well as different types of metals and plastics. Excellent initial tack. Solvent-free, does not contain isocyanates. Thermal resistance ranges -40–+100 °C. Salt water resistance. One-component.

Special features

  • Ultimate initial tack
  •  Excellent thermal resistance
  •  the lowest application temperature + 1 °C
  •   moisture and chemical resistant
  •   also for moist surfaces
  •  suitable also for exterior use

Materials

Product Information
Application

One-component KiiltoFix Premium is based on silyl polymer technology and has high bond strength. Suitable for fixing and sealing inside and outside. Ideal for applications which require high initial tack (cars, boats, mobile homes), fixing skirtings and building boards. Materials to be used must be free from dust, grease and oil. Good adhesion on various stones, concrete, most metals, wood, glass and glazed surfaces as well as epoxy and polyester surfaces. With plastic materials adhesive tests are recommended prior to actual use. Has M1-emission classification for building products. Solvent-free, does not contain isocyanates or phthalates. Paintable with most water-based paints (always test before use). Very good resistance against weathering, good resistance against UV light. Good resistance to chemicals (weak solutions). Salt water resistant. Not suitable for glazing.

Package Size Color EAN Code
290 ml white 6411512440293
Technical Information
Application temperature

+1–40 °C

Consistency

paste with high viscosity

Coverage

8.9 x 8.9 mm triangle shaped joint, approx. 7.3 m/cartridge

Curing rate

3 mm/d, approx. 10 mm/7 d (23 °C/50 % RH)

Density/specific weight

approx. 1.6 kg/l

Elongation at break

350% (DIN 53504)

Hardness

Shore A 60

Lap shear strength

SS/SS 2 N/mm²

Max. joint distortion

± 25 %

Package sizes

290 ml

Shrinkage

approx. 2 %

Skin time

approx. 10 min (23 °C, RH 50 %)

Storage

Unopened at +10–25 °C for 12 months.

Tensile strength

2.2 N/mm² (DIN 53504)

Type/binder

MS-polymer

Instructions and Safety
Instructions for use

Cut tip of the cartridge and place the nozzle. KiiltoFix Premium is applied with a hand or battery gun. Note! Consider product’s high viscosity, when choosing the application gun. Apply in stripes. Ensure that the surfaces to be sealed/bonded are clean before applying adhesive. Close the package carefully after use. Uncured product can be removed with xylene or acetone. Cured product can be removed only mechanically. Prevailing conditions such as air temperature, air humidity, substrate’s material and humidity as well as the amount of adhesive applied have a strong impact on the skin time and drying.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
LEED