Kiilto Pro N10
Silyl modified adhesive sealant

Kiilto N10 is a one-component adhesive sealant for gluing and sealing metal, glass fiber and different types of plastics in the transport industry.

Special features

  • Good resistance against chemicals
  • Good resistance against weathering and UV radiation
  • Paintable
  • Excellent adhesion
  • Very elastic bond




One-component Kiilto N10 is a fast bonding and elastic adhesive sealant based on new polymer technology. It is suitable for gluing and sealing various materials (e.g. welding seams) in demanding structural bondings that require fast curing. Typical applications include truck bodies, mobile homes, buses and trains. Good adhesion on various stones, concrete, most metals, wood, glass and glazed surfaces as well as epoxy and polyester surfaces. For use on plastic and rubber preliminary adhesive tests are recommended prior to actual use. Excellent adhesion to different materials - no need for priming in most cases. Very elastic, yet mechanically strong bond. Almost odourless. Almost non-shrinking. Paintable with most water-based paints (always test before use).

Package Size Color Product Code EAN Code
290 ml black T2453.926 6411512453293
600 ml black T2453.933 6411512453606
290 ml grey T2452.926 6411512452296
600 ml grey T2452.933 6411512452609
290 ml white T2451.926 6411512451299
600 ml white T2451.933 6411512451602
Application temperature


Curing rate

3 mm/d, ca 10 mm/7 d (23 °C, 50 %RH)

Density/specific weight

approx. 1.49 kg/dm³

Elongation at break

300 % (DIN 53504)


Shore A 50

Lap shear strength

- SS/SS 3.0 N/mm²

Package sizes

290 ml cartridge, 600 ml sausage (white)
290 ml cartridge, 600 ml sausage (grey)
290 ml cartridge, 600 ml sausage (black)

Skin time

approx. 10 min (23°C, 50 % RH)


Unopened at +10–25 °C for 18 months.

Temperature resistance when dry

-40–90 °C

Tensile strength

2.5 N/mm² (DIN 53504)


Silyl modified polymer


approx. 2.5 million mPas (BrookField H-Path T-F/2.5 +20 °C)

Instructions for use

Materials being used must be dust-free, dry and free from grease and oil. For the best results, clean metal surfaces with Kiilto Cleaner 303 and then prime with Kiilto Metalliprimer. The adhesive is spread on the surface and smoothed with a trowel, if needed. When gluing large uniform surfaces or surfaces in very dry conditions, we suggest spraying lightly with water (approx. 5–10 g/m²). Close the package carefully after use. Uncured adhesive can be removed using Kiilto Cleaner 303 or acetone, cured adhesive only mechanically.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. Ensure the product's suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit

M1 emission classification for building material
Key Flag