Kiilto Medium Remonttisilote renovation filler
Ready-mixed plaster for dry indoor walls and ceilings. Good adhesion also to painted surfaces. Suitable for fixing reinforcing tape on gypsum boards.
- universal filler
- for scratches and max. 5 mm holes
- overall application max. up to 3 mm
- sandable after 2–3 h from filling, final drying time 2–3 h/mm
- can be painted or wallpapered
Kiilto Medium is a water-based, ready-mixed plaster for finishing walls and ceilings prior to painting or wallpapering. Suitable also for fixing and smoothing reinforcing tapes to gypsum board plates. We recommend painting the surface before wallpapering to aid future removal. Complies with the requirements of EN 13963:2005 and EN 15824:2009 standards. Kiilto Medium is suitable for finishing gypsum boards and other construction boards as well as concrete, render and levelling coated substrates.
|Package Size||EAN Code|
> 0.3 MPa (EN 18524)
stress grading RL01...RL04 of paintable surfaces (The RYL Code of building practice 2012)
One tube covers approx. 0.4 m² area (1 mm thick layer) or approx. 600 small holes (10 mm x 10 mm x 5 mm).
A2-s1, d0 (EN 13963)
> 320 N (EN 13963)
3 mm, in holes 5mm
400 ml plastic tube
In unopened containers, above +1 °C, for 1 year.
normal room conditions, lowest operating temperature +10 °C
The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface must be sanded and sanding dust removed carefully before applying the next layer.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.