Kiilto Max Täyttösilote repair filler

Kiilto Max is a ready-mixed filler for filling big holes and smoothing walls and ceilings in dry areas. Max. 25 mm. Water-soluble

Special features

  • for max. 25 mm fillings
  • sandable after 2–3 h from repair filling, final drying time 1–2 d

Materials

Product Information
Application

Kiilto Max is a water-based coarse filler for filling holes in walls and ceilings in dry areas. If needed, Kiilto Max can be smoothed with finer plasters before painting or wallpapering. We recommend painting the surface before wallpapering to aid future removal. Complies with the requirements of EN 15824:2009 standard. Kiilto Max is suitable to be used for filling holes in concrete, render and levelling undercoat.

Package Size EAN Code
400 ml 6411512011509
Technical Information
Bond strength

> 0,3 MPa (EN 15824)

Classifications and certificates

stress grading RL01...04 of paintable surfaces (The RYL Code of building practice 2012)

Colors

grey

Coverage

One tube covers approx. 0.4 m² area (1 mm thick layer) or approx. 600 small holes (10 mm x 10 mm x 5 mm).

Density/specific weight

Approx. 0.9 kg/l

Layer thickness

Holes 25 mm (apply two layers if needed)

Package sizes

400 ml plastic tube

Storage

In unopened containers, above +1 °C, for 1 year.

Working conditions

normal room conditions, lowest operating temperature +10 °C

Instructions and Safety
Instructions for use

The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface must be sanded and sanding dust removed carefully before applying the next layer.

Kiilto Max is a ready-mixed filler. The filler is applied with a steel trowel. Apply two layers in deep holes. After drying, the surface can be easily sanded.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
CE marking
LEED